Sietec Security Ltd Shop


Dealer Channels Access Control Biometrics Access Control Hardware Access Control i-Key RXTX Access Control Net2 Access Control Proximity Access Control Standalone Access Control Switch2 Access Control Tador Access Control WGAccess Biometric Time and Attendance CCTV and Video Cellular Products Centrex Products Communications Doorphones - Intercoms Emergency Alert Systems Hospitality Products iAcess Controller Industrial Intrinsically Safe Products LED Lighting Network Products PABX Analogue PABX Peripheral PABX VoIP SIP Power Adaptors Power Products Public Address Systems Signalling Products Stock Clearance Strobes n Sounders Telephone Devices Autodiallers DECT Products Doorphones ITS Hazardous Location Equipt Intercoms Video IP Interface Products Norstar Meridian BCM PABX VoIP Phone Ringers - Indicators Telephones VoIP Voice Recording Telephone Ringers Telephones Test Equipment Tools Vehicle Alert Voice Recording Wireless Land Line


All : Telephone Devices : Phone Ringers - Indicators

Telephone Ringers - Sounders and Indicators

Represents a huge array of options to satisfy every need from call centres, radio stations, theatres, casinos, warehouses, factories, car yards, and more.

 

      Print
    page
    Item   Login for Trade or Reseller Pricing
    DUET HORN SPEAKER 8 OHMS 10WATTSA-1155
    Speaker 8ohm 10Watts for use with the Algo Duet Plus A-1825P which has a built-in Ring Detect Circuit for telephone and PABX applications.

    		A-1155
    DUET PLUS LOUD RINGER-PAGER UNITA-1825
    The most versatile and feature rich Loud Ringing and Voice Pager Unit on the market. Built-in Ring Detect, Contact Closure Detect, Audio Detect, Low Voltage Detect. Extremely versatile. Adjustable volume and tone.

    		A-1825
    DUET PLUS WITH 240VAC PLUG PACKA-1825P
    The most versatile and feature rich Loud Ringing and Voice Pager Unit on the market. Built-in Ring Detect, Contact Closure Detect, Audio Detect, Low Voltage Detect. Extremely versatile. Adjustable volume and tone.

    		A-1825P
    CIT-40 INTERNAL LOUD RINGERGT-CIT-NC



    48V OFF HOOK RELAY - POTTEDGT-P7227



    24V OFF HOOK RELAY - POTTEDGT-P7228
    In a telephone based paging system, a telephone situated near a paging speaker can create feedback that makes paging impossible. The Off-Hook Relay automatically disables paging speakers near the telephone to eliminate feedback. Off-Hook Relays can also trigger signaling devices when, for example, an emergency phone is in use. All relays are encapsulated in polyester epoxy resin and weather proof and hazardous area enclosures are available.

    		Gt-p7228
    BEDLAM-EX1 WATERPRF LOUD RINGER 2WIREHB-8471900
    The unit is rated to IP66 and is therefore capable of operating in adverse conditions. The Bedlam Loud Tonecaller is designed to replace the traditional mains powered bell and is powered by the PABX and PSTN ringing voltage (60-100 volts AC). A variable output (85-105dBA) is possible by means of a potentiometer located within the unit

    		Hb-8471900
    ES2-FL TELETONE RINGER UNIT 2W SPEC.HB-8486000
    NEW LOWER PRICE - These units replace the traditional SonAlert Bell - The units have 1 of 4 Tones Adjustable - Volume Control - Have a Superb Tone Quality - Ideal for Offices, Small Factories, Warehouses, Retail and Trade Shops, and for the Hard of Hearing - Available in Ringing Voltage or 48Vdc Versions (same model) - Approved NZ and Aust - Seeking Australian Partner.

    		HB-8486000
    LED RINGING INDICATOR AMBERRD-LED119A
    Primarily designed for Quiet Areas and Noisy Environs where noise is unwanted or creates an environment where normal loud ringing is drowned or is difficult to hear.

    		RD-LED119A
    LED RINGING INDICATOR REDRD-LED119R
    Primarily designed for Quiet Areas and Noisy Environs where noise is unwanted or creates an environment where normal loud ringing is drowned or is difficult to hear.

    		RD-LED119R
    LED SILENT RINGING INDICATOR WHITERD-LED119W
    Primarily designed for Quiet Areas and Noisy Environs where noise is unwanted or creates an environment where normal loud ringing is drowned or is difficult to hear.


    CEILING MOUNT VISUAL RINGER AMBERRD-LED121AC
    Ceiling or Pedestal Mounted Hi Intensity LED Telephone Ringer primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only.

    		RD-LED121AC
    WALL MOUNT VISUAL RINGER AMBERRD-LED121AW
    Primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only.

    		Rd-led121aw
    CEILING MOUNT VISUAL RINGER REDRD-LED121RC
    Ceiling or Pedestal Mounted Hi Intensity LED Telephone Ringer primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only

    		Rd-led121rc
    WALL MOUNT VISUAL RINGER REDRD-LED121RW
    Wall Mounted Hi Intensity LED Telephone Ringer primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only

    		Rd-led121rw
    LINE POWERED RINGING INTERFACE UNITRD-LPI01
    This Housed PCB board has the basics of the Ringing Interface to drive an input to a PLC, Crestron or Access Control input I/O unit etc. for signalling purposes via the LAN system. No external power required. It is recommended that the device that is being driven has an isolated input for the PCB. Isolation should be greater than 3kv. If not available we recommend the use of the RD-RLY01


    RING DETECTION RELAY TELESWITCHRD-RLY01
    Ring Detect TeleRelay - Approved NZ and Aust - Designed for the Installer enabling them to terminate their own devices to operate to Ringing or Analogue PABX Message Waiting Signal - Virtual "Plug-n-Play" makes it easy to install - Mount on wall, hard wire in your own device*, plug into power outlet and then plug into Telephone Line. Applications are many including switching 240Vac with slave relays etc. Suitable for Standard Telephone Lines and Analog Phone Lines off PABX Systems

    		RD-RLY01
    TELESWITCH - DUAL RING DETECT UNIT W MWRD-RLY01-AUD



    RING DETECT RELAY TELESWITCH DIN RailRD-RLY01DIN



    RINGING SOUNDER 32 TONES 3 VOLSRD-RS01-NZ
    Powered Ringer Sounder Units with 1 of 32 Tones and 1 of 3 Volumes. Complete with power Supply and Built-in Ring Detect Circuit.


    RINGING SOUNDER-STROBE TWO PART AMBERRD-RSS01A-NZ
    Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.

    		RD-RSS01A-NZ
    RINGING SOUNDER-STROBE TWO PART BLUERD-RSS01B-NZ
    Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green or Clear Lens.

    		RD-RSS01B-NZ
    RINGING SOUNDER-STROBE TWO PART CLEARRD-RSS01C-NZ
    Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Clear or Red Lens.

    		RD-RSS01C-NZ
    RINGING SOUNDER-STROBE TWO PART GREENRD-RSS01G-NZ
    Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.

    		RD-RSS01G-NZ
    RINGING SOUNDER-STROBE TWO PART REDRD-RSS01R-NZ
    Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.

    		RD-RSS01R-NZ
    RINGING SOUNDER-STROBE TWO PART RED BODYRD-RSS01RR-NZ
    Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.

    		RD-RSS01RR-NZ
    RINGING STROBE SOUNDER COMBO AMBERSTROBERD-RSS02-ANZ
    These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.

    		Rd-rss02-anz
    RINGING STROBE SOUNDER COMBO BLUE STROBERD-RSS02-BNZ
    These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.

    		Rd-rss02-bnz
    RINGING STROBE SOUNDER COMBO CLEARSTROBERD-RSS02-CNZ
    These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.

    		Rd-rss02-cnz
    RINGING STROBE SOUNDER COMBO GREENSTROBERD-RSS02-GNZ
    These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.

    		Rd-rss02-gnz
    RINGING STROBE SOUNDER COMBO RED STROBERD-RSS02-RNZ
    These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.

    		Rd-rss02-rnz
    Ringing Sounder-Strobe Three part AmberRD-RSS42A



    Ringing Sounder-Strobe Three part BlueRD-RSS42B



    Ringing Sounder-Strobe Three part AmberRD-RSS62A