Sietec Security Ltd Shop



DISTYBOX 5000 - 9000M SMA

Print
page
Dt-500023

The distybox provides the communications link to DECT base stations at distances which were previously unthinkable. Depending on the environmental conditions and the type of aerials used, distances of 9 km and more can be bridged.

This means it can be used in WLL systems to provide coverage for extensive areas. It can also provide a low-cost point-to-point connection between remote buildings.

  • DECT (Digital Enhanced Cordless Telecommunications)
  • GAP (Generic Access Protocol)
  • Automatic registration on the DECT base station
  • Plug and play
  • Dialling procedure: DTMF
  • Internal relay capability
  • Wall mounting
  • Dimensions in mm: W 120 x H 100 x D 38
  • SMB socket for an external aerial via coaxial cable
  • Internal aerial
  • Frequency range: 1880-1900 MHz
  • Transmission output: 10 mW on average
  • Voice transmission: 32 kbit/s ADPCM
  • Group 3 fax, V.29 at max. 9600 bit/s
  • Modem mode: at max. 9600 bit/s
  • Power supply: 230 V ~, 50 Hz mains-independent at 12 V DC
  • CE certification
  • Any analogue terminals can be connected to DECT/GAP telephone systems or existing cordless telephones, e.g.:
    • Fax machines
    • Telephones
    • Answering machine
    • Door Intercoms
    • Modems (up to 9600 bit/s)
    • Telemetry
    • Alarm Applications
    • Point of Sale Terminals
    • and more

Downloads and Support page


<< Back

Code
DT-500023
Back