| Item |
|
Login for Trade or Reseller Pricing |
| DUET HORN SPEAKER 8 OHMS 10WATTS | A-1155 |
|
Speaker 8ohm 10Watts for use with the Algo Duet Plus A-1825P which has a built-in Ring Detect Circuit for telephone and PABX applications.
|
|
|
| DUET PLUS LOUD RINGER-PAGER UNIT | A-1825 |
|
The most versatile and feature rich Loud Ringing and Voice Pager Unit on the market. Built-in Ring Detect, Contact Closure Detect, Audio Detect, Low Voltage Detect. Extremely versatile. Adjustable volume and tone.
|
|
|
| DUET PLUS WITH 240VAC PLUG PACK | A-1825P |
|
The most versatile and feature rich Loud Ringing and Voice Pager Unit on the market. Built-in Ring Detect, Contact Closure Detect, Audio Detect, Low Voltage Detect. Extremely versatile. Adjustable volume and tone.
|
|
|
| CIT-40 INTERNAL LOUD RINGER | GT-CIT-NC |
|
|
|
|
| RING DETECT RELAY - POTTED | GT-P7224 |
|
Ring Detect Relay responds to 40 - 155 VAC, 20 - 25Hz telephone ringing voltage. The relay can be used to activate options such as Guardian’s strobe lights, Guardian’s SR40 loud ringer or other signaling devices. In a telephone based paging system, a telephone situated near a paging speaker can create feedback that makes paging impossible.
|
|
|
| BEDLAM-EX1 WATERPRF LOUD RINGER 2WIRE | HB-8471900 |
|
The unit is rated to IP66 and is therefore capable of operating in adverse conditions. The Bedlam Loud Tonecaller is designed to replace the traditional mains powered bell and is powered by the PABX and PSTN ringing voltage (60-100 volts AC). A variable output (85-105dBA) is possible by means of a potentiometer located within the unit
|
|
|
| ES2-FL TELETONE RINGER UNIT 2W SPEC. | HB-8486000 |
|
NEW LOWER PRICE - These units replace the traditional SonAlert Bell - The units have 1 of 4 Tones Adjustable - Volume Control - Have a Superb Tone Quality - Ideal for Offices, Small Factories, Warehouses, Retail and Trade Shops, and for the Hard of Hearing - Available in Ringing Voltage or 48Vdc Versions (same model) - Approved NZ and Aust - Seeking Australian Partner.
|
|
|
| LED RINGING INDICATOR AMBER | RD-LED119A |
|
Primarily designed for Quiet Areas and Noisy Environs where noise is unwanted or creates an environment where normal loud ringing is drowned or is difficult to hear.
|
|
|
| LED RINGING INDICATOR RED | RD-LED119R |
|
Primarily designed for Quiet Areas and Noisy Environs where noise is unwanted or creates an environment where normal loud ringing is drowned or is difficult to hear.
|
|
|
| LED SILENT RINGING INDICATOR WHITE | RD-LED119W |
|
Primarily designed for Quiet Areas and Noisy Environs where noise is unwanted or creates an environment where normal loud ringing is drowned or is difficult to hear.
|
|
|
| CEILING MOUNT VISUAL RINGER AMBER | RD-LED121AC |
|
Ceiling or Pedestal Mounted Hi Intensity LED Telephone Ringer primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only.
|
|
|
| WALL MOUNT VISUAL RINGER AMBER | RD-LED121AW |
|
Primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only.
|
|
|
| CEILING MOUNT VISUAL RINGER RED | RD-LED121RC |
|
Ceiling or Pedestal Mounted Hi Intensity LED Telephone Ringer primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only
|
|
|
| WALL MOUNT VISUAL RINGER RED | RD-LED121RW |
|
Wall Mounted Hi Intensity LED Telephone Ringer primarily designed for Noisy Environs where factory noise creates an environment where normal loud sounders and ringing is drowned or is difficult to hear - comes complete with our RD-RLY01 and a 12Vdc Plug Pack for Ringing Indication - Can be purchased separately as an 12 or 24Vdc Indicator Only
|
|
|
| LINE POWERED RINGING INTERFACE UNIT | RD-LPI01 |
|
This Housed PCB board has the basics of the Ringing Interface to drive an input to a PLC, Crestron or Access Control input I/O unit etc. for signalling purposes via the LAN system. No external power required. It is recommended that the device that is being driven has an isolated input for the PCB. Isolation should be greater than 3kv. If not available we recommend the use of the RD-RLY01
|
|
|
| RING DETECTION RELAY TELESWITCH | RD-RLY01 |
|
Ring Detect TeleRelay - Approved NZ and Aust - Designed for the Installer enabling them to terminate their own devices to operate to Ringing or Analogue PABX Message Waiting Signal - Virtual "Plug-n-Play" makes it easy to install - Mount on wall, hard wire in your own device*, plug into power outlet and then plug into Telephone Line. Applications are many including switching 240Vac with slave relays etc. Suitable for Standard Telephone Lines and Analog Phone Lines off PABX Systems
|
|
|
| TELESWITCH - DUAL RING DETECT UNIT W MW | RD-RLY01-AUD |
|
|
|
|
| RING DETECT RELAY TELESWITCH DIN Rail | RD-RLY01DIN |
|
|
|
|
| RINGING SOUNDER 32 TONES 3 VOLS | RD-RS01-NZ |
|
Powered Ringer Sounder Units with 1 of 32 Tones and 1 of 3 Volumes. Complete with power Supply and Built-in Ring Detect Circuit.
|
|
|
| RINGING SOUNDER-STROBE TWO PART AMBER | RD-RSS01A-NZ |
|
Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.
|
|
|
| RINGING SOUNDER-STROBE TWO PART BLUE | RD-RSS01B-NZ |
|
Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green or Clear Lens.
|
|
|
| RINGING SOUNDER-STROBE TWO PART CLEAR | RD-RSS01C-NZ |
|
Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Clear or Red Lens.
|
|
|
| RINGING SOUNDER-STROBE TWO PART GREEN | RD-RSS01G-NZ |
|
Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.
|
|
|
| RINGING SOUNDER-STROBE TWO PART RED | RD-RSS01R-NZ |
|
Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.
|
|
|
| RINGING SOUNDER-STROBE TWO PART RED BODY | RD-RSS01RR-NZ |
|
Approved NZ and Aust - Primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens.
|
|
|
| RINGING STROBE SOUNDER COMBO AMBERSTROBE | RD-RSS02-ANZ |
|
These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.
|
|
|
| RINGING STROBE SOUNDER COMBO BLUE STROBE | RD-RSS02-BNZ |
|
These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.
|
|
|
| RINGING STROBE SOUNDER COMBO CLEARSTROBE | RD-RSS02-CNZ |
|
These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.
|
|
|
| RINGING STROBE SOUNDER COMBO GREENSTROBE | RD-RSS02-GNZ |
|
These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.
|
|
|
| RINGING STROBE SOUNDER COMBO RED STROBE | RD-RSS02-RNZ |
|
These Sounder/Strobe units are primarily designed for Noisy Environs where factory or ship noise (engine room) creates an environment where normal loud ringing is drowned or is difficult to hear - The unit gives excellent bounce around capability - Plug-n-Play makes it easy to install. Mount on wall, plug into power outlet and then plug into Telephone Line. It then sounds and flashes on incoming calls. Available with Amber, Blue, Green, Red or Clear Lens. Will operate to 24Vdc in super yachts, ships etc. without plug pack.
|
|
|
| Ringing Sounder-Strobe Three part Amber | RD-RSS42A |
|
|
|
|
| Ringing Sounder-Strobe Three part Blue | RD-RSS42B |
|
|
|
|
| Ringing Sounder-Strobe Three part Amber | RD-RSS62A |
|
|
|
|
