| Item |
|
Login for Trade or Reseller Pricing |
| NET2 Installer USB-RS485 Adaptor | PA-455-294 |
|
Aids fault finding and testing of Net2 control units. Use a laptop to connect directly to the Net2 control unit. Plugs directly into the RS485 terminals of a Net2 control unit. No end of line resistors required
|
|
|
| NET2 RS485 - RS232 Interface | PA-455-477 |
|
The Net2 comms converter connects the PC comport (RS232) to the Net2 dataline (RS485). The converter is supplied in a black plastic enclosure complete with a 12V dc power supply.
|
|
|
| NET2 USB-RS485 Adaptor in Plastic Housing | PA-455-482-EX |
|
The 455-482 USB comms converter is supplied in a black plastic enclosure. It does not require a power supply.
|
|
|
| NET2 RS485 HIGH SPEED REPEATER | PA-477-836 |
|
Extend a dataline beyond 1km. Dataline can be branched off. Install up to 5 repeaters on a single dataline. Intergrated termination jumpers
|
|
|
| NET2 RS485 REPEATER PSU PLASTIC CAB | PA-477-844 |
|
The maximum length for a RS485 data-line is 1km. Using a repeater on the data-line allows it to be extended further. Each repeater extends the maximum overall data-line length by 1km. A maximum of five repeaters can be used on a single data-line.
|
|
|
| NET2 MODEM | PA-477-900 |
|
The Net2 modem and modem adaptor allow communication between the Net2 server PC and control units across a standard phone line. This is ideal for managing remote sites. The remote sites need only be connected when system changes are made or event reports are required. A single system can comprise of several Net2 datalines connected by phone line.
|
|
|
| NET2 MODEM ADAPTOR RS485-232 | PA-477-971 |
|
RS485 to RS232 Convertor with power supply. One unit required per remote dial up Net2 Site to connect Net2 Modem to Net2 control units.
|
|
|
| NET2 RS485 TCP-IP Ethernet Interface | PA-655-861 |
|
The Net2 485 TCP/IP ethernet interface allows communication between the Net2 server PC and control units across a TCP/IP ethernet network. Where a PC network already exists this can be a very convenient solution. A single Net2 system can comprise of up to 16 datalines each connecting to the PC network using a 485 TCP/IP interface.
|
|
|
